nRF52832 BLE_DFU空中升级OTA（三）准备升级工程（SDK14.2.0） - 程序员大本营

准备需要加入DFU功能的工程

在工程main文件services_init函数中加入DFU服务

1 uint32_t err_code;
2
3 // Initialize the async SVCI interface to bootloader.
4 err_code = ble_dfu_buttonless_async_svci_init(); 5 //APP_ERROR_CHECK(err_code);
6 if(NRF_ERROR_NO_MEM != err_code) 7 {
8 ble_dfu_buttonless_init_t dfus_init =
9 { 10 .evt_handler = ble_dfu_evt_handler 11 }; 12
13 err_code = ble_dfu_buttonless_init(&dfus_init); 14 APP_ERROR_CHECK(err_code); 15 }

加入DFU事件处理函数

1 // YOUR_JOB: Update this code if you want to do anything given a DFU event (optional).
2 /**@brief Function for handling dfu events from the Buttonless Secure DFU service
3 *
4 * @param[in] event Event from the Buttonless Secure DFU service.
5 */
6 static void ble_dfu_evt_handler(ble_dfu_buttonless_evt_type_t event)
7 {
8 switch (event)
9 { 10 case BLE_DFU_EVT_BOOTLOADER_ENTER_PREPARE: 11 NRF_LOG_INFO("Device is preparing to enter bootloader mode."); 12 // YOUR_JOB: Disconnect all bonded devices that currently are connected. 13 // This is required to receive a service changed indication 14 // on bootup after a successful (or aborted) Device Firmware Update.
15 break; 16
17 case BLE_DFU_EVT_BOOTLOADER_ENTER: 18 // YOUR_JOB: Write app-specific unwritten data to FLASH, control finalization of this 19 // by delaying reset by reporting false in app_shutdown_handler
20 NRF_LOG_INFO("Device will enter bootloader mode."); 21 break; 22
23 case BLE_DFU_EVT_BOOTLOADER_ENTER_FAILED: 24 NRF_LOG_ERROR("Request to enter bootloader mode failed asynchroneously."); 25 // YOUR_JOB: Take corrective measures to resolve the issue 26 // like calling APP_ERROR_CHECK to reset the device.
27 break; 28
29 case BLE_DFU_EVT_RESPONSE_SEND_ERROR: 30 NRF_LOG_ERROR("Request to send a response to client failed."); 31 // YOUR_JOB: Take corrective measures to resolve the issue 32 // like calling APP_ERROR_CHECK to reset the device.
33 APP_ERROR_CHECK(false); 34 break; 35
36 default: 37 NRF_LOG_ERROR("Unknown event from ble_dfu_buttonless."); 38 break; 39 } 40 }

加入几个必要的文件到工程

SDK_14.2.0工程\components\ble\ble_services\ble_dfu下的

SDK_14.2.0工程\components\libraries\bootloader\dfu下的

并加入以下头文件路径

SDK_14.2.0工程\components\libraries\bootloader\dfu

SDK_14.2.0工程\components\libraries\svc

Main.c 头文件中加入

include "ble_dfu.h"

记得修改sdk_config.h中NRF_SDH_BLE_VS_UUID_COUNT

1 // <o> NRF_SDH_BLE_VS_UUID_COUNT - The number of vendor-specific UUIDs.
2 #ifndef NRF_SDH_BLE_VS_UUID_COUNT 3 #define NRF_SDH_BLE_VS_UUID_COUNT 1 //默认为0
4 #endif

开启RTT打印LOG

1 //========================================================== 2 // <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK 3 //==========================================================
4 #ifndef NRF_LOG_ENABLED 5 #define NRF_LOG_ENABLED 1
6 #endif

以及

1 //========================================================== 2 // <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend 3 //==========================================================
4 #ifndef NRF_LOG_BACKEND_RTT_ENABLED 5 #define NRF_LOG_BACKEND_RTT_ENABLED 1
6 #endif

编译一下，下载观察RTT信息修改RAM地址，再次编译后没有问题，就可以用新生成的hex文件来制作升级zip了。

原网址: 访问
创建于: 2021-12-22 11:56:40
目录: default
标签: 无

未标明原创文章均为采集，版权归作者所有，转载无需和我联系，请注明原出处，南摩阿彌陀佛，知识，不只知道，要得到

请先后发表评论
  • 最新评论
  • 总共0条评论